How Nutmeg Is Processed for Export

Between the nutmeg tree and a buyer's warehouse, nutmeg passes through several selection and processing steps that decide its grade, its safety and its price. This article follows Indonesian nutmeg through our factory in Surabaya, from the arrival of the raw nutmeg to the export lot.

Where our nutmeg comes from

Indonesia is the home of nutmeg: the tree, Myristica fragrans, is native to the Banda Islands in Maluku. Our nutmeg is sourced from Siau, Ambon. We work on fair trade sourcing with Indonesian farming communities, because we believe spice growing has to remain attractive for smallholder farmers in the long term.

After harvest, the nutmeg seed is separated from the fruit and from the mace that surrounds it, dried in its shell and then shelled. The dried nutmeg kernels are what arrive at the factory for selection and processing. The steps below are the ones every lot goes through before we ship it as an Indonesian nutmeg exporter.

Step 1: Manual selection

Even with modern machinery, the human eye remains an important quality control step. Experienced operators inspect the nutmeg and remove foreign material and defects, and sort it by condition: sound, shrivelled, cracked or broken.

Step 2: UV selection

Aflatoxins are toxic compounds produced by certain moulds, and they are the main safety concern for nutmeg. We use UV selection to detect and eliminate nutmegs affected by aflatoxin. This is what allows us to supply grades with a maximum total aflatoxin level below 10 ppb or below 20 ppb, matching the requirements of different destination markets.

Step 3: Breaking and sieving

For broken nutmeg, our breaking mill reduces whole nutmeg into coarse or broken pieces while keeping fines to a minimum. Sieving systems then separate the product by particle size, removing oversized particles and dust where required, so that each lot meets the customer's specification.

Step 4: Metal separation

High-performance metal separators detect and remove ferrous, non-ferrous and stainless steel contaminants. This protects the end consumer and the buyer's own processing equipment.

Step 5: Sterilization, on request

Spices are agricultural products and can carry microorganisms. On request, we treat nutmeg with one of two methods, each third-party validated for a log 5 reduction, which means 99.999% of the target microorganisms are eliminated:

  • Continuous steam sterilization, which reduces microbiological contamination while helping preserve aroma, flavour, colour and essential oils. This is the method we recommend for buyers in the European Union.
  • ETO (ethylene oxide) sterilization, available when requested and permitted by the destination market, and performed according to the applicable regulations and the customer's specifications.

Step 6: Grinding, for ground nutmeg

Nutmeg sold as a powder is milled in the same factory. Our ground nutmeg is offered with a minimum volatile oil content of 4%, 5% or 6%, in a standard particle size of 20 mesh, with other particle sizes available on request. Our milling lines include a cryogenic mill, which grinds spices at -18 °C using liquid nitrogen to limit heat and help preserve volatile oils, and a classifier mill for precise, uniform particle sizes.

Step 7: Laboratory control and food safety

Quality control is carried out by our own factory laboratory, and food safety in the factory is managed under FSSC 22000. Every stage of production is supported by quality controls, with at least nine quality control stages across our process.

Ready for export

The result is a lot of a defined grade, with a defined aflatoxin specification and, where requested, sterilized, ready to be packed and shipped. What each grade name means is explained in Nutmeg Grades Explained.